Camera control cables
Camera Remote Control Cables
The short lengths of copper that decide whether two control units will talk to each other.
When a control unit and a camera come from different families, the difference is usually one cable. These assemblies map one manufacturer's remote-control pinout onto another's.
Sony CCA-5, Panasonic AJ-C10050, and adaptor cables that let a control surface of one brand drive a camera of the other.
| Family | Control Cables |
|---|---|
| Products in this family | Camera Remote Control Cables |
| Built to order | Connector, channel count and control interface are configured per order |
Product
Camera Remote Control Cables
CCA-5 for Sony, AJ-C10050 for Panasonic, and adaptor cables that bridge the two families.
Camera control cablesAJ-C10050 remote control cableSony control to Panasonic camera adaptor cable
What it does
- +Sony CCA-5 remote control cable.
- +Panasonic AJ-C10050 remote control cable.
- +Adaptor cable for Sony control to Panasonic camera.
- +Assemblies built to the pinout each control unit expects.
- +Used when a control surface and a camera come from different families.
- +Short, serviceable lengths for truck and studio use.
Interfaces and configuration
| Sony | CCA-5 remote control cable |
|---|---|
| Panasonic | AJ-C10050 remote control cable |
| Cross-family | Sony control to Panasonic camera adaptor cable |
| Use | Bridging control units and cameras of different families |
| Construction | Assembled to the pinout of each end |
| Application | OB trucks, studios, rental stock |
Models in this family
| CCA-5 | Sony remote control cable |
|---|---|
| AJ-C10050 | Panasonic remote control cable |
| Sony to Panasonic adaptor | Maps Sony control onto a Panasonic camera |
Every unit is configured to the interfaces in the order. Nothing in this table is a performance claim; it is the interface list we build to. Ask for the datasheet when a number has to be committed to a drawing.
Questions buyers ask
Why would a truck carry a cross-family control cable?
Because rental stock and client requests mix camera families, and a control unit from one brand sometimes has to drive a body from another. A mapped cable is cheaper than a second control unit.
Are these cables passive?
They are pinout adaptors for the remote-control interface, not converters. If a protocol actually has to change, you need a converter, not a cable, and we will say so rather than sell you a cable that cannot work.
Can lengths be customised?
Yes. These are assemblies, so length and connector are specified per order.